欢迎访问东莞市沙田威航吸塑制品加工厂官网!

吸塑厂,吸塑制品,吸塑托盘,环保吸塑泡壳,线材吸塑包装,植绒吸塑内托,日用品吸塑包装

吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,电压成品组装,深圳吸塑包装,PVC透明吸塑

产品分类
新闻动态

东莞市沙田威航吸塑制品加工厂

座机:0769-88688322

传真:0769-88688311

手机:13712778368/15362092628

Q Q:781376917/1170828172

邮箱:liming8688322@163.com

地址:东莞市沙田镇大泥管理区金玉村

网址:http://www.dgwhxs.com

 

文具吸塑包装盒

您的位置:首页 > 产品展示 > 五金/电子吸塑包装盒 > 文具吸塑包装盒

文具吸塑包装盒

热门产品推荐:文具吸塑包装盒,化妆品吸塑包装,日用品吸塑包装,折边插卡吸塑,环保吸塑泡壳,彩色植绒吸塑,线材吸塑包装,PVC透明吸塑,PVC透明吸塑,植绒内托

详细信息

文具吸塑包装盒原材料的优势:
文具吸塑包装盒原材料采用PET吸塑,我们对于这个的认知,它应该是吸塑包装产品的一种以制成材料命名的包装产品,其实实际上也是这样的,而这个PET原材料又分为纤维级聚酯切片和非纤维级聚酯切片材料,在很多的包装产品的制作上都会应用这个材料,因为这个材料比较适用于在包装方面进行应用,而在吸塑包装方面的应用比较多,因为在这个方面的应用它的优势能够发挥得比较极致。

影响文具吸塑包装盒包装生产的因素:
1.文具吸塑包装盒吸塑模也是很关键的,发热片一定要四周均匀,高低一致,不能有很多接头.否则吸塑效果很差.
2.纸张:首先纸张本身要符合吸塑要求,印刷前要做白纸吸塑测试,OK后方可印刷.现在市场上吸塑效果较好是韩松的白底白板和白马纸.
3. 吸塑机的温度和压力时间的控制要掌握好,如果有胶片被烧坏说明温度过高或热压时间过长.
4.文具吸塑包装盒吸塑油的种类很多,有普通吸塑油,环保吸塑油,强力吸塑油,不同的油对应的纸张类型不同,对应的吸塑材料不同.如PET材料就要用白底白板的韩松纸和环保吸塑油,PVC材料就可以用灰底白板纸和普通吸塑油来搭配.
5.不同的PVC/PET片材厚度对文具吸塑包装盒吸塑效果影响很大,越厚的材料越容易吸塑,一般吸塑包装用品的吸塑罩材料厚度为0.15--0.17mm.低于0.15mm的吸塑罩很难吸塑的上.
6.印刷的油墨对文具吸塑包装盒吸塑效果影响很大:实地的大面积印刷吸塑效果要差很多,尤其是荧光成份的油墨.印刷后油墨要干透后过吸塑.
7. 印刷油墨干燥后过吸塑油做吸塑测试.
8. 吸塑跟压力也有关系,但是很多机器调整不了压力。如果发现吸塑不上可以加大压力再试试。
9. 吸塑后装箱可做试摔测试。

[Stationery] blister packaging material advantages:
PET plastic, our perception is that it should be a plastic packaging products made ​​of materials named in packaging products, in fact, is actually the case, and this material is divided into PET fiber grade polyester chips and non-fiber grade polyester chips material on many of packaging products made ​​of this material will be applied, because the material is more applicable to be used in packaging, blister packaging and application of more, because the application in this regard it was more extreme advantage to play, then we can look at some of the specific advantages on this material.

Factors stationery packaging production of plastic packaging:
1 plastic model is very critical, uniform heating element must be four weeks, the level of consistency, there can be a lot of joints. Otherwise blister poorly.
2 Paper: First the paper itself to comply with the requirements of plastic, white plastic test done before printing, OK before printing blister better now on the market is the Korean white pine and white horse white paper.
Controlling the temperature and pressure of 3 blister machine time to master, if the film was burned description or hot temperature for too long.
Many different types of 4 plastic oil, a common plastic oil, green plastic oil, strong plastic oil, different paper types corresponding to different oils, different corresponding plastic material such as PET material necessary to use white board Hansol paper's oil and green plastic, PVC material you can use duplex board paper and ordinary plastic oil to match.
5 different PVC / PET plastic sheet thickness on the effect of large, more easily thicker plastic material, plastic cover material thickness of plastic packaging supplies for 0.15--0.17mm. Less than 0.15mm in plastic enclosures difficult blister on.
6 printing inks big impact on the blister effect: a large area of ​​the field effect printing blister lot worse, especially fluorescent ink after printing ink ingredients to dry over the blister.
7 after printing ink dried plastic oil do Blister tests.
8 plastic also has a relationship with the pressure, but not a lot of machines to adjust the pressure. If you find that you can increase the pressure on the blister does not try again.
After 9 blister packing do try wrestling test.

文具吸塑包装盒
图片展示:
文具吸塑包装盒

>>产品快速导航

首页 | 关于我们 | 产品展示 | 联系我们 | 客户留言 | 常见问题 | 网站地图 | XML地图

相关推荐:厚街沙田虎门吸塑,TPU PVC软胶吸塑,PET环保吸塑,深圳吸塑包装,植绒吸塑内托,折边插卡吸塑,文具吸塑包装盒,玩具吸塑包装,PVC透明吸塑,折边插卡吸塑
说明书印刷加工,礼品彩盒批发定制,彩卡吊牌定制,三折吸塑盒,吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,环保吸塑泡壳,防静电吸塑盘,PS PET环保吸塑盘

粤ICP备14069735号 版权所有:东莞市沙田威航吸塑制品加工厂 地址:东莞市沙田镇大泥管理区金玉村 手机:13712778368/15362092628

邮箱:liming8688322@163.com 座机:0769-88688322 传真:0769-88688311

QQ:781376917/1170828172 技术支持:杭州四喜

铣刀纯红薯淀粉活性氧化铝球喷码机厂家PVC颗粒