欢迎访问东莞市沙田威航吸塑制品加工厂官网!

吸塑厂,吸塑制品,吸塑托盘,环保吸塑泡壳,线材吸塑包装,植绒吸塑内托,日用品吸塑包装

吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,电压成品组装,深圳吸塑包装,PVC透明吸塑

产品分类
新闻动态

东莞市沙田威航吸塑制品加工厂

座机:0769-88688322

传真:0769-88688311

手机:13712778368/15362092628

Q Q:781376917/1170828172

邮箱:liming8688322@163.com

地址:东莞市沙田镇大泥管理区金玉村

网址:http://www.dgwhxs.com

 

环保吸塑泡壳

您的位置:首页 > 产品展示 > 日用品吸塑包装 > 环保吸塑泡壳

环保吸塑泡壳

所属分类:日用品吸塑包装

主营产品推荐:环保吸塑泡壳,化妆品吸塑包装,日用品吸塑包装,文具吸塑包装盒,折边插卡吸塑,环保吸塑泡壳,彩色植绒吸塑,线材吸塑包装,PVC透明吸塑,植绒内托

详细信息

保吸塑泡壳的材料特点:
一、PVC片材韧性较高,不易燃烧,燃烧时会产生氯气,对环境造成一定影响,PVC易热合,可采用封口机和高周波封边,是生产环保吸塑泡壳的主要原料。
二、PS硬片密度低,韧性差,易燃烧,燃烧时会产生苯乙烯气体(属有害气体),所以一般用来生产各种工业用的环保吸塑泡壳。
三、PET硬片韧性好,是如今几年发展起来的新型材料。凭着其优良的韧性、高强度、高透明性,以及可回收再生利用,易燃烧,燃烧时不产生有害气体,属于环保材料而逐渐取缔PVC,但价格高。
四、PETG材料是为了解决PET材料热熔点较高这一问题,人们在PET表面复合上一层PVC膜,取名为PETG,但价格更高一些。

环保吸塑泡壳成型对材料的要求:
1.环保吸塑泡壳吸塑成型只能生产壁厚比较均匀的产品,(一般倒角处稍薄),不能制得壁厚相差悬殊的塑料制品
2.环保吸塑泡壳吸塑成型的壁厚一般在1到2mm范围之内或更加薄(小包装用吸塑包装的片材zui常用的厚度为0.15到0.25mm)
3.环保吸塑泡壳吸塑成型制品的拉伸度受到一定的限制,吸塑成型的塑料容器直径深度比一般不超过1,ji端情况下亦不得超过1.5
4.环保吸塑泡壳吸塑成型的尺寸精度差,其相对误差一般在百分之一以上。

[Environmental] blister material characteristics:
A higher PVC sheet toughness, not combustion, will produce chlorine gas when burned, some impact on the environment, PVC heat easily, can sealing machine and high frequency edge, is the main raw material for the production of transparent plastic products.
Two, PS hard piece of low density, poor toughness, easy to burn, will produce styrene gas (which is harmful gases) when burned, it is generally used to produce a variety of plastic pallets for industrial use.
Three, PET rigid film toughness, and is now a few years to develop new material. With its excellent toughness, high strength, high transparency, and the use of recyclable, easy to burn, does not produce harmful gases when burned, are environmentally friendly materials while phasing PVC, but the price is high.
Four, PETG material PET material in order to solve this problem a high melt point, people on the surface of the composite layer PET PVC film, named PETG, but the higher prices of some.

Environmental blister forming material requirements:
1 plastic molding can only produce more uniform wall thickness of the product, (usually chamfer at slightly thinner), can not obtain significant differences between the wall thickness of plastic products
Wall thickness of 2 plastic molding is generally in the range of 1 to 2mm or more thin (small package with the most commonly used plastic packaging sheet thickness of 0.15 to 0.25mm)
3 stretch plastic molding products, subject to certain restrictions, plastic molded plastic container diameter greater depth than is generally not more than one, in extreme cases will not exceed 1.5
4 plastic molding dimension accuracy, the relative error is generally one percent or more.

环保吸塑泡壳图片展示:
环保吸塑泡壳

上一个
[高调波]
>>产品快速导航

首页 | 关于我们 | 产品展示 | 联系我们 | 客户留言 | 常见问题 | 网站地图 | XML地图

相关推荐:厚街沙田虎门吸塑,TPU PVC软胶吸塑,PET环保吸塑,深圳吸塑包装,植绒吸塑内托,折边插卡吸塑,文具吸塑包装盒,玩具吸塑包装,PVC透明吸塑,折边插卡吸塑
说明书印刷加工,礼品彩盒批发定制,彩卡吊牌定制,三折吸塑盒,吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,环保吸塑泡壳,防静电吸塑盘,PS PET环保吸塑盘

粤ICP备14069735号 版权所有:东莞市沙田威航吸塑制品加工厂 地址:东莞市沙田镇大泥管理区金玉村 手机:13712778368/15362092628

邮箱:liming8688322@163.com 座机:0769-88688322 传真:0769-88688311

QQ:781376917/1170828172 技术支持:杭州四喜

铣刀纯红薯淀粉活性氧化铝球喷码机厂家PVC颗粒