欢迎访问东莞市沙田威航吸塑制品加工厂官网!

吸塑厂,吸塑制品,吸塑托盘,环保吸塑泡壳,线材吸塑包装,植绒吸塑内托,日用品吸塑包装

吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,电压成品组装,深圳吸塑包装,PVC透明吸塑

产品分类
新闻动态

东莞市沙田威航吸塑制品加工厂

座机:0769-88688322

传真:0769-88688311

手机:13712778368/15362092628

Q Q:781376917/1170828172

邮箱:liming8688322@163.com

地址:东莞市沙田镇大泥管理区金玉村

网址:http://www.dgwhxs.com

 

日用品吸塑包装

您的位置:首页 > 产品展示 > 日用品吸塑包装 > 日用品吸塑包装

日用品吸塑包装

所属分类:日用品吸塑包装

厂家推荐产品:日用品吸塑包装,化妆品吸塑包装,文具吸塑包装盒,折边插卡吸塑,环保吸塑泡壳,彩色植绒吸塑,线材吸塑包装,PVC透明吸塑,防静电吸塑盘,吸塑内托

详细信息

厂家推荐产品:日用品吸塑包装,化妆品吸塑包装,文具吸塑包装盒,折边插卡吸塑,环保吸塑泡壳,彩色植绒吸塑,线材吸塑包装,PVC透明吸塑,防静电吸塑盘,吸塑内托

日用品吸塑包装
生产工艺:
1:日用品吸塑包装模具制作及加工:根据要求或样品规格,首先制作好吸塑模具,一般条件下,都是利用石膏制作吸塑包装模具,但也有用木雕及金属雕刻的产品作模具,石膏模具制作好后,先让其自然干燥完全或是烘干,然后根据产品表面凸凹具体情况,用1-2毫米钻花在不影响产品包装模样的低凹处钻许多小孔,如果是包装盒之类产品,还得在四周边上钻一些小孔,以便吸塑生产时,能将空气抽出,模具钻好孔后,还得将石膏模具进行加硬处理,加硬处理方法是用浓明矾饱和液浸泡后晾干。
2:日用品吸塑包装模具处理干燥完全后,将模具装入真空室上层铁板上,然后根据模具大小,将塑料片载成适用规格尺寸,然后将此片材放入加热木柜内,使其完全固定好,再将木柜连同塑料片材置恒温炉上进行软化处理。
3:将软化处理好的塑料片连同木柜,置于真空室中,开动吸气开关,将真空室内空气吸抽干净,待塑料片冷却后,即得到与模具相同的凹型包装或工艺模具。
4:日用品吸塑包装整理;将生产出来的产品进行修边整理即为成品产品,再经包装后即可出售。

日用品吸塑包装其优点如下:
1.日用品吸塑包装具有优良的透明性与光洁度,展示效果好。
2.表面装饰性能优良,可不经表面处理即可印刷,易压制花纹,易金属处理(真空镀金属层)
3.日用品吸塑包装具有良好的力学强度。
4.对氧气及水蒸汽的阻隔性能良好。
5.日用品吸塑包装耐化学性能好,可经受多种化学物质的侵蚀。
6.日用品吸塑包装无毒,卫生性能可靠,可用以食品、药物及医疗器材的包装,并可以Y射线[span]对其所包装的物品消毒。
7.对环境保护的适应性好,可经济而方便地回收利用;焚烧其废弃物时,不产生危害环境有害物质。此类片材被认为是符合(ROSH)环境保护要求的一种理想的包装材料。

Manufacturer's recommended products: Commodity blister packaging, cosmetic plastic packaging, stationery blister packaging, folding plastic card, green blister, color flocking plastic, wire, plastic packaging, PVC transparent plastic, anti-static plastic tray, plastic Neto

[Commodity] plastic packaging production process:
1: mold making and processing: According to the request or sample size, first make a good plastic mold, under normal conditions, the production of plastic packaging are using plaster molds, but also useful for carving and engraving of metal products for mold, plaster mold making good after, let it dry naturally or dry completely, then punch the specific circumstances according to the product surface, with 1-2 mm drill spent does not affect the appearance of the product packaging, low recess drill many holes, if the packaging of products , had to drill some holes around the edge, so that when the plastic production, can air out, after the mold drilled holes, had the plaster mold hardening process, plus the hard approach is soaked with a concentrated solution of saturated alum after dry.
2: Die dry completely after treatment, the mold into the vacuum chamber on the upper iron, then according to the size of the mold, the plastic sheet contained a suitable size, and then put this sheet is heated lockers inside it completely fixed , then lockers along with the thermostat set on a plastic sheet softening treatment furnace.
3: good, together with a plastic sheet softened wooden cabinet, placed in a vacuum chamber, the suction switch is actuated, the vacuum sucking indoor air clean After cooling the plastic sheet, to obtain the same female mold or the packaging process of the mold.
4: blister packaging finishing; will be produced out of the product is finished trimming finishing products, then you can sell after packaging.

Commodity blister packaging its advantages are as follows:
1 has excellent transparency and finish, good display effect.
2 surface decoration excellent performance, without surface treatment can be printed, easy to suppress pattern, easy metal processing (vacuum metallization layer)
3 has good mechanical strength.
4 good barrier properties against oxygen and water vapor.
5 good chemical resistance, can withstand the erosion of a variety of chemical substances.
6 non-toxic, sanitary and reliable performance, can be used to food, drugs and medical equipment packaging, and can be Y-ray [span] of its packaged goods disinfection.
7 adaptability to environmental protection, and can be economical and easy to recycle; incineration of its waste, hazardous substances do not harm the environment. Such sheets are considered to be consistent with (ROSH) environmental requirements of an ideal packaging material.

日用品吸塑包装图片展示:
日用品吸塑包装

下一个
[PVC透明吸塑]
>>产品快速导航

首页 | 关于我们 | 产品展示 | 联系我们 | 客户留言 | 常见问题 | 网站地图 | XML地图

相关推荐:厚街沙田虎门吸塑,TPU PVC软胶吸塑,PET环保吸塑,深圳吸塑包装,植绒吸塑内托,折边插卡吸塑,文具吸塑包装盒,玩具吸塑包装,PVC透明吸塑,折边插卡吸塑
说明书印刷加工,礼品彩盒批发定制,彩卡吊牌定制,三折吸塑盒,吸塑周转盘,塑料周转盘,透明吸塑盘,彩色植绒吸塑,环保吸塑泡壳,防静电吸塑盘,PS PET环保吸塑盘

粤ICP备14069735号 版权所有:东莞市沙田威航吸塑制品加工厂 地址:东莞市沙田镇大泥管理区金玉村 手机:13712778368/15362092628

邮箱:liming8688322@163.com 座机:0769-88688322 传真:0769-88688311

QQ:781376917/1170828172 技术支持:杭州四喜

铣刀纯红薯淀粉活性氧化铝球喷码机厂家PVC颗粒